Crisafulli Vertical PumpsTM

Vertical Pumps, flows to 18,000 GPM at 280 TDH, solids passing to 5.5". Two SRS Crisafulli Electric Powered Vertical Pumps loaded for shipment

SRS Crisafulli's Integrated Product Solutions To remove water, soft and abrasive material, sludges, and slurries from Industrial, Municipal, Agricultural, and Government Lagoons, Ponds, Lakes, Canals, and flooded and flood threatened areas. And to irrigate farms and ranches.

Go to Vertical Applications

Get a FREE Consultation   Let our Application Engineers help you select the best pump to achieve your pumping goals.

Go to Crisafulli’s Searchable Product Catalog to find electronically the Crisafulli pump that offers the capabilities and features you seek to solve your pumping challenge.

Return to Crisafulli Pumps.

Vertical Pumps, flows to 18,000 GPM at 280 TDH, solids 5.5".Drawing of Crisafulli Vertical Pump

A SRS Crisafulli solution for every Vertical Pumping Need

iconFlows to 18,000 GPM
iconTDH to 280 feet
iconSpherical solids passing to 5.5 inches

Crisafulli Vertical Pumps are dependable, powerful, and versatile. They are designed for stationary applications, such as sewage digesters and lift stations, manure tanks, chemical sumps, and dry docks.

Each Crisafulli Vertical Pump has a Crisafulli Impeller Inside.

Standard Duty Crisafulli vertical pumps are reliable, proven performers. They are equipped with grease lubricated, sealed bearings and are an ideal choice for moving relatively clean water. For sand, silt, mud, sludge or abrasives, choose the rugged Severe Duty version, which are constructed with abrasion-resistant heat treated steel (450 Brinell hardness), have dual mechanical shaft seals (to prevent contamination), and an enclosed oil filled bearing frame, allowing the pump to perform in the most demanding environments.

All Crisafulli Vertical Pumps are submersible, centrifugal pumps, which range in size from 2 inches to 24 inches. The pumps require no priming, check valves, suction pipes, or screens, and are self drained.

Steel construction assures long life and trouble free operation. The pumps pass remarkably large solids and pump high-weight/high viscosity fluids with ease.

Benefits
Features
icon Custom design for your particular lengths, angles of discharge and high-viscosity wastes. icon Discharge sizes from 2 inch to 24 inch
icon Flow rates from 32 GPM to 18,000 GPM icon Horsepower from 1 to 300 HP.
icon Total Dynamic Heads from 5 feet to 280 feet. icon Single or twin intake ports
icon Simple to use icon Standard lengths to 20 feet
icon Proven reliability icon Custom lengths to 60 feet
icon No priming required icon Power sources include direct-drive electric, belt and sheave drive (electric), or gear box driven with gas, diesel or electric motors.
icon Low maintenance icon Optional open impeller is recommended for manure and sewage uses.
icon Long useful life icon Stainless steel or special epoxy-coated versions are available for high-acid applications.
  icon Single or double suction.