Crisafulli Submersible Hydraulic PumpsTM

S-Series Standard Duty

 

   
       
hydraulic submersible pump

Performance capabilities range from 150 to 1020 GPM depending on the size selected. Total Dynamic Heads (TDH) range from 20 feet to 80 feet, depending on the pump size and hydraulic motor selected. See below for GPM and TDH for each model listed. 

Description. SRS Crisafulli S-Series, hydraulic powered pumps are portable, submersible pumps, available in three styles. The Standard Duty pumps are equipped with a Nitrile drive shaft seal, A36 mild carbon steel pump volute and impeller, and heavy-duty hydraulic gear motor. All pumps have suction stands and threaded discharges (other discharge finishes available upon request).


Pump Size Inches
Flow - GPM
TDH - Feet
Solids Passing Inches
SRSC Part Number
Motor Part Number
Est. weight - pounds
2
150
20
.50
HY022S-2505
HM2505
75
2.5
275
20
.50
HY252S-2505
HM2505
78
3
300
20
1.75
HY032S-2505
HM2505
110
3
330
25
1.75
HY032S-2507
HM2507
120
3
500
50
1.75
HY032S-2510
HM2510
120
4
550
20
2.25
HY042S-2510
HM2510
145
4
880
40
2.25
HY042S-2515
HM2515
148
4
1,020
60
2.25
HY042S-2520
HM2520
150
4
680
80
2.25
HY042S-2525
HM2525
155
Standard Options
Hydraulic Slurry Gate (price is same for each size pump). “Slurry Gate” is opened to agitate and slurry the pond. Solids and liquids are drawn into the pump, blended and injected through the slurry gate into unmixed material. After a period of time, depending on material thickness, the entire pit will be slurried and the operator can close the slurry gate hydraulically from the bank. The pump will then pump the material out at high volume. No separate agitator or mixer pumps are needed. One SRS Crisafulli pump does it all.
Stainless Steel Pump
Hydraulic Slurry Gate
Crisafulli Diesel/Hydraulic Power Units
Crisafulli Electric/Hydraulic Power Units
Hydraulic Hose & Fittings
WARNING - During pump operation the return hydraulic hose pressure should not exceed 100 PSI. Some control valves may cause peak over pressuring during shutdown. If the return hydraulic hose pressure may exceed 100 PSI, then consult the factory.