.
submersible electric pump Performance capabilities range from 70 to 900 GPM depending on the size selected. 16 Models. Total Dynamic Heads (TDH) range from 15 feet to 80 feet, depending on the pump size and electric motor selected. See below for GPM and TDH for each model listed. Solids passing capability range from 1/2 inches to 2-1/4 inches.
Description. SRS Crisafulli Submersible Electric Pumps are American made, direct driven, centrifugal pumps. The pumps are manufactured with an ASTM A36 mild carbon steel (BN 150 or BN 400 hardness) pump volute and impeller, dual carbon/ceramic shaft seals, UL listed, totally enclosed, air filled, non-ventilated, explosion-proof electric motor, (Class 1, Groups C & D, hazardous locations), moisture detection probes, thermal overload protection, 25 feet of power and control cable (additional length available) and gray epoxy paint. All pumps with motors larger than 5 horsepower are 460 volt, 3 phase only. (Consult factory for motor sizes smaller than 5 HP, and for other special voltages.)
Pump Size Inches
Horse Power HP
Flow - GPM
TDH - Feet
Solids Passing Capability Inches
SRSC Part Number
Impeller Size Inches
2
1
70
15
.50
SE022R-001-4
5
2
2
80
20
.50
SE022R-002-4
5.5
2
3
90
25
.50
SE022R-003-4
6
2
4
110
30
.50
SE022R-004-4
6.5
2.5
3
200
15
.50
SE252R-003-4
6
2.5
5
250
25
.50
SE252R-005-4
7
3
5
200
20
1.75
SE032R-005-4
6
3
7.5
275
25
1.75
SE033R-007-4
6.5
3
10
325
30
1.75
SE032R-010-4
7
3
15
375
35
1.75
SE032R-015-4
8
4
15
700
35
2.25
SE042R-015-4
8
4
20
800
40
2.25
SE042R-020-4
8.5
4
25
800
50
2.25
SE042R-025-4
9
4
40
900
60
2.25
SE042R-040-4
9.5
4
50
900
80
2.25
SE049R-050-4
10
Standard Options
Case & Impeller from AR Steel BN 400 Hardness  
Case & Impeller from 316 Stainless Steel  
Electrical Control Panels  
Mercury Float Switches  
Tungsten Carbide Seals  
Additional Cable