.
electric submersible pump Performance capabilities range from 125 to 1800 GPM depending on the size selected. 21 Models. Total Dynamic Heads (TDH) range from 10 feet to 100 feet, depending on the pump size and electric motor selected. See below for GPM and TDH for each model listed. Solids passing capability range from 15/16 inches to 3 inches.
Description. SRS Crisafulli Submersible Electric Pumps are American made, direct driven, centrifugal pumps. The pumps are manufactured with an ASTM A36 mild carbon steel (BN 150 or BN 400 hardness) pump volute and impeller, dual carbon/ceramic shaft seals, UL listed, totally enclosed, air filled, non-ventilated, explosion-proof electric motor, (Class 1, Groups C & D, hazardous locations), moisture detection probes, thermal overload protection, 25 feet of power and control cable (additional length available) and gray epoxy paint. All pumps with motors larger than 5 horsepower are 460 volt, 3 phase only. (Consult factory for motor sizes smaller than 5 HP, and for other special voltages.)
Pump Size Inches
Horse Power HP
Flow - GPM
TDH - Feet
Solids Passing Capability Inches
SRSC Part Number
Impeller Size Inches
2
2
125
10
.9375
SE029R-002-6
7
2
3
140
20
.9375
SE029R-003-6
8
2
4
140
30
.9375
SE029R-004-6
9
2.5
3
175
20
1.50
SE259R-002-6
8
2.5
5
275
30
1.50
SE259R-002-6
10
3
5
450
10
1.9375
SE039R-005-6
9
3
7.5
450
20
1.9375
SE039R-005-6
10
3
10
500
30
1.9375
SE039R-005-6
11
3
12.5
675
40
1.9375
SE039R-005-6
12
4
5
550
10
2.75
SE049R-005-6
9
4
10
600
20
2.75
SE049R-010-6
10
4
15
600
30
2.75
SE049R-015-6
11
4
20
800
40
2.75
SE049R-020-6
12
4
30
900
50
2.75
SE049R-030-6
13
6
75
1,800
70
3.00
SE069R-075-6
14.5
6
75
1,800
80
3.00
SE069R-075-6
15
6
100
1,700
90
3.00
SE069R-100-6
15.5
6
100
1,600
100
3.00
SE069R-100-6
16.5
Standard Options
Case & Impeller from AR Steel BN 400 Hardness  
Case & Impeller from 316 Stainless Steel  
Electrical Control Panels  
Mercury Float Switches  
Tungsten Carbide Seals  
Additional Cable